CC1352P74T0RGZR

SIMPLELINK ARM CORTEX-M4F MULTIP

1 Features

Wireless microcontroller

• Powerful 48-MHz Arm® Cortex®-M4F processor

• 704KB flash program memory

• 256KB of ROM for protocols and library functions

• 8KB of cache SRAM

• 144KB of ultra-low leakage SRAM with parity for high-reliability operation

• Dual-band Sub-1 GHz and 2.4 GHz operation

• Dynamic multiprotocol manager (DMM) driver

• Programmable radio includes support for 2 (G)FSK, 4-(G)FSK, MSK, OOK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC

• Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

• Autonomous MCU with 4KB of SRAM

• Sample, store, and process sensor data

• Fast wake-up for low-power operation

• Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

• MCU consumption:

– 2.63 mA active mode, CoreMark

– 55 μA/MHz running CoreMark

– 0.8 μA standby mode, RTC, 144KB RAM

– 0.1 μA shutdown mode, wake-up on pin

• Ultra low-power sensor controller consumption:

– 25.2 μA in 2 MHz mode

– 701 μA in 24 MHz mode

• Radio Consumption:

– 5.4 mA RX at 868 MHz

– 6.4 mA RX at 2.4 GHz

– 21 mA TX at +10 dBm at 2.4 GHz

– 24.9 mA TX at +14 dBm at 868 MHz

– 64 mA TX at +20 dBm at 915 MHz

– 101 mA TX at +20 dBm at 2.4 GH

Wireless protocol support

• Thread, Zigbee®, Matter

• Bluetooth® 5.2 Low Energy

• Wi-SUN®

• mioty®

• Amazon Sidewalk

• Wireless M-Bus

• SimpleLink™ TI 15.4-stack

• 6LoWPAN

• Proprietary systems

High performance radio

•-121 dBm for 2.5-kbps long-range mode

•-110 dBm at 50 kbps, 802.15.4, 868 MHz

•-104 dBm for Bluetooth® Low Energy 125-kbps

• Output power up to +20 dBm with temperature compensation

Regulatory compliance

• Suitable for systems targeting compliance with these standards:

– ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3

– FCC CFR47 Part 15

– ARIB STD-T108 and STD-T66

MCU peripherals

• Digital peripherals can be routed to any GPIO

• Four 32-bit or eight 16-bit general-purpose timers

• 12-bit ADC, 200 kSamples/s, 8 channels

• 8-bit DAC

• Two comparators

• Programmable current source

• Two UART, two SSI, I2C, I2S

• Real-time clock (RTC)

• Integrated temperature and battery monitor

Security enablers

• AES 128- and 256-bit cryptographic accelerator

• ECC and RSA public key hardware accelerator

• SHA2 Accelerator (full suite up to SHA-512)

• True random number generator (TRNG)

Development tools and software

• LP-CC1352P7 Development Kits

• SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)

• SmartRF™ Studio for simple radio configuration

• Sensor Controller Studio for building low-power sensing applications

• SysConfig system configuration tool

Operating range

• On-chip buck DC/DC converter

• 1.8-V to 3.8-V single supply voltage

•-40 to +105°C

Package

• 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)

• RoHS-compliant package

2 Applications

• Grid infrastructure

– Smart Meters

– electricity meter, water meter, gas meter and heat cost allocator

– Grid communications

– wireless communications

– EV charging infrastructure

– AC charging (pile) station

– Other alternative energy

– energy harvesting

• Building automation

– Building security systems

– motion detector, door and window sensor, glass break detector, panic button, electronic smart lock and IP network camera

– HVAC systems

– thermostat, environmental sensor andHVAC controller

– Fire safety

– smoke and head detector, gas detector and fire alarm control panel

• Retail Automation

– Retail automation & payment applications

– electronic shelf labels and portable POS terminal

• Personal Electronics

– RF remote controls

– Smart Speakers, Smart Displays and Set-top box

– Gaming and electronic and robotic toys

– Wearables (non-medical), smart trackers, smart clothing and smartwatch

• Wireless Modules

– Wireless third party modules including Bluetooth Low Energy, Thread, Zigbee, Matter, Wi-SUN®, Amazon Sidewalk, mioty® and multi protocol

– Wireless communications modules

3 Description

The SimpleLink™ CC1352P7 device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty®, Wi-SUN®, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC1352P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC1352P7 has a software defined radio powered by an Arm® Cortex®-M0, which allows support for multiple physical layers and RF standards. CC1352P7 supports operation in 287 to 351-MHz, 359 to 527-MHz, 861 to 1054-MHz, 1076 to 1315-MHz, and 2360 to 2500-MHz frequency bands. PHY and frequency band switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC1352P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBm TX at 101 mA in the 2.4-GHz band, and +20 dBm TX at 64 mA in the Sub-1 GHz band.

The CC1352P7 has a low sleep current of 0.9 μA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-μA system current.

The CC1352P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1352P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC1352P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

3.1 Functional Block Diagram