MT41K256M16TW-107:P

IC DRAM 4GBIT PAR 96FBGA

Description

DDR3L SDRAM (1.35V) is a low voltage version of the

DDR3 (1.5V) SDRAM. Refer to DDR3 (1.5V) SDRAM

(Die Rev :E) data sheet specifications when running in 1.5V compatible mode.

Features

•VDD = VDDQ = 1.35V (1.283–1.45V)

• Backward compatible to VDD = VDDQ = 1.5V ±0.075V

– Supports DDR3L devices to be backward com patible in 1.5V applications

• Differential bidirectional data strobe

• 8n-bit prefetch architecture

• Differential clock inputs (CK, CK#)

• 8 internal banks

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Programmable CAS (READ) latency (CL)

• Programmable posted CAS additive latency (AL)

• Programmable CAS (WRITE) latency (CWL)

• Fixed burst length (BL) of 8 and burst chop (BC) of 4 (via the mode register set [MRS])

• Selectable BC4 or BL8 on-the-fly (OTF)

• Self refresh mode

•TC of 105°C

– 64ms, 8192-cycle refresh up to 85°C

– 32ms, 8192-cycle refresh at >85°C to 95°C

– 16ms, 8192-cycle refresh at >95°C to 105°C

• Self refresh temperature (SRT)

• Automatic self refresh (ASR)

• Write leveling

• Multipurpose register

• Output driver calibration

Options

• Configuration

– 1 Gig x 4

– 512 Meg x 8

– 256 Meg x 16

• FBGA package (Pb-free) – x4, x8

– 78-ball (9mm x 10.5mm) Rev. E

– 78-ball (7.5mm x 10.6mm) Rev. N

– 78-ball (8mm x 10.5mm) Rev. P

• FBGA package (Pb-free) – x16

– 96-ball (9mm x 14mm) Rev. E

– 96-ball (7.5mm x 13.5mm) Rev. N

– 96-ball (8mm x 14mm) Rev. P

• Timing – cycle time

– 938ps @ CL = 14 (DDR3-2133)

– 1.07ns @ CL = 13 (DDR3-1866)

– 1.25ns @ CL = 11 (DDR3-1600

• Operating temperature

-Commercial (0°C ≤Tc ≤ +95°C)

- Industrial (-40°C ≤Tc≤ +95°C)

-Automotive (-40°C≤Tc≤+105°C)

FBGA Part Marking Decoder

Due to space limitations, FBGA-packaged components have an abbreviated part marking that is different from the part number. For a quick conversion of an FBGA code.

Important Notes and Warnings

Micron Technology, Inc. ("Micron") reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions. This document supersedes and replaces all information supplied prior to the publication hereof. You may not rely on any information set forth in this docu ment if you obtain the product described herein from any unauthorized distributor or other source not authorized by Micron.

Automotive Applications. Products are not designed or intended for use in automotive applications unless specifi cally designated by Micron as automotive-grade by their respective data sheets. Distributor and customer/distrib utor shall assume the sole risk and liability for and shall indemnify and hold Micron harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees arising out of, directly or indirectly, any claim of product liability, personal injury, death, or property damage resulting directly or indirectly from any use of non automotive-grade products in automotive applications. Customer/distributor shall ensure that the terms and con ditions of sale between customer/distributor and any customer of distributor/customer (1) state that Micron products are not designed or intended for use in automotive applications unless specifically designated by Micron as automotive-grade by their respective data sheets and (2) require such customer of distributor/customer to in demnify and hold Micron harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees arising out of, directly or indirectly, any claim of product liability, personal injury, death, or property damage resulting from any use of non-automotive-grade products in automotive applications.

Critical Applications. Products are not authorized for use in applications in which failure of the Micron compo nent could result, directly or indirectly in death, personal injury, or severe property or environmental damage ("Critical Applications"). Customer must protect against death, personal injury, and severe property and environ mental damage by incorporating safety design measures into customer's applications to ensure that failure of the Micron component will not result in such harms. Should customer or distributor purchase, use, or sell any Micron component for any critical application, customer and distributor shall indemnify and hold harmless Micron and its subsidiaries, subcontractors, and affiliates and the directors, officers, and employees of each against all claims, costs, damages, and expenses and reasonable attorneys' fees arising out of, directly or indirectly, any claim of product liability, personal injury, or death arising in any way out of such critical application, whether or not Mi cron or its subsidiaries, subcontractors, or affiliates were negligent in the design, manufacture, or warning of the Micron product.

Customer Responsibility. Customers are responsible for the design, manufacture, and operation of their systems, applications, and products using Micron products. ALL SEMICONDUCTOR PRODUCTS HAVE INHERENT FAIL URE RATES AND LIMITED USEFUL LIVES. IT IS THE CUSTOMER'S SOLE RESPONSIBILITY TO DETERMINE WHETHER THE MICRON PRODUCT IS SUITABLE AND FIT FOR THE CUSTOMER'S SYSTEM, APPLICATION, OR PRODUCT. Customers must ensure that adequate design, manufacturing, and operating safeguards are included in customer's applications and products to eliminate the risk that personal injury, death, or severe property or en vironmental damages will result from failure of any semiconductor component.

Limited Warranty. In no event shall Micron be liable for any indirect, incidental, punitive, special or consequential damages (including without limitation lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort, warranty, breach of contract or other legal theory, unless explicitly stated in a written agreement executed by Micron's duly authorized representative.