STM32G030C8T6

IC MCU 32BIT 64KB FLASH 48LQFP

Features

• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz

•-40°C to 85°C operating temperature

• Memories

– Up to 64 Kbytes of Flash memory with protection

– 8 Kbytes of SRAM with HW parity check

• CRC calculation unit

• Reset and power management

– Voltage range: 2.0 V to 3.6 V

– Power-on/Power-down reset (POR/PDR)

– Low-power modes: Sleep, Stop, Standby

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 48 MHz crystal oscillator

– 32 kHz crystal oscillator with calibration

– Internal 16 MHz RC with PLL option

– Internal 32 kHz RC oscillator (±5 %)

• Up to 44 fast I/Os

– All mappable on external interrupt vectors

– Multiple 5 V-tolerant I/Os

• 5-channel DMA controller with flexible mapping

• 12-bit, 0.4 µs ADC (up to 16 ext. channels)

– Up to 16-bit with hardware oversampling

– Conversion range: 0 to 3.6V

• 8 timers: 16-bit for advanced motor control, four 16-bit general-purpose, two watchdogs, SysTick timer

• Calendar RTC with alarm and periodic wakeup from Stop/Standby

• Communication interfaces

– Two I2C-bus interfaces supporting Fast mode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode

– Two USARTs with master/slave synchronous SPI; one supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature

– Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface

• Development support: serial wire debug (SWD)• All packages ECOPACK 2 compliant

Description

The STM32G030x6/x8 mainstream microcontrollers are based on high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high level of integration, they are suitable for a wide range of applications in consumer, industrial and appliance domains and ready for the Internet of Things (IoT) solutions.

The devices incorporate a memory protection unit (MPU), high-speed embedded memories (8 Kbytes of SRAM and up to 64 Kbytes of Flash program memory with read protection, write protection), DMA, an extensive range of system functions, enhanced I/Os, and peripherals. The devices offer standard communication interfaces (two I2Cs, two SPIs / one I2S, and two USARTs), one 12-bit ADC (2.5 MSps) with up to 19 channels, a low-power RTC, an advanced control PWM timer, four general-purpose 16-bit timers, two watchdog timers, and a SysTick timer.

The devices operate within ambient temperatures from -40 to 85°C and with supply voltages from 2.0 V to 3.6 V. Optimized dynamic consumption combined with a comprehensive set of power-saving modes allows the design of low-power applications.

VBAT direct battery input allows keeping RTC and backup registers powered. The devices come in packages with 8 to 48 pins.