LM3424BKBSTEVAL

LM3424 降压升压评估板

1 Introduction

This wide range evaluation board showcases the LM3424 NFET controller used with a buck-boost current regulator. It is designed to drive 4 to 10 LEDs at a maximum average LED current of 1A from a DC input voltage of 10 to 70V.

The evaluation board showcases many of the LM3424 features including thermal foldback, analog dimming, external switching frequency synchronization, and high frequency PWM dimming, among others. There are many external connection points to facilitate the full evaluation of the LM3424 device including inputs, outputs and test points. Refer to Table 1 for a summary of the connectors and test points.

The buck-boost circuit can be easily redesigned for different specifications by changing only a few components (see the Alternate Designs section). Note that design modifications can change the system efficiency for better or worse.

This application note is designed to be used in conjunction with the LM3424 datasheet as a reference for the LM3424 buck-boost evaluation board. Refer to the LM3424 Constant Current N-Channel Controller with Thermal Foldback for Driving LEDs (SNVS603) data sheet for a comprehensive explanation of the device, design procedures, and application information.

2 Key Features

• Input: 10V to 70V

• Output: 4 to 10 LEDs at 1A

• Thermal Foldback / Analog Dimming

• PWMDimming up to 10 kHz

• External Synchronization > 500 kHz

• Input Under-voltage and Output Over-voltage Protection